RUF 1100+

Characteristics
Material:
organic
Max. productivity: (kg/h)
1020
Power: (kWt)
75
Compression pressure, max.: (kg/cm²)
1700
Briquette size in section: (mm)
240 x 70, 240 x 80
Size: (LxWxH) (mm)
2700 х 2400 х 2400
Weight: (t)
6,5
Ask a question
Description

INDIVIDUALLY CUSTOMISED BRIQUETTE PRESS FOR VARIOUS BIOGENIC MATERIALS
Chips and residues that are produced in very large quantities (e.g. wood, agricultural residues, paper, textile dust, etc.) can best be formed into briquettes through the use of the RUF 1100+. To ensure briquettes of a consistently high quality and density, it is important that the water content of the starting material is below 15%. Briquette formats of either 240 x 70mm or 240 x 80mm are possible with this briquette press, again without the addition of any binding agents. A wide variety of options also enable the briquette press to be optimally tailored to customer requirements.

THE ADVANTAGES FOR YOU AT A GLANCE:

  • Fully automatic 24h operation possible
  • Long service life & low maintenance costs
  • Customisable
  • Compact construction
  • More than 35 years’ experience

Manufacturer

Ruf GmbH & Co. KG

Details

Contact person

Konstantin Miroshnik

Sales Manager

+371 29474852 konstantin.miroshnik@rmp.lv
Ask a question
Name RUF LIGNUM Classic RUF LIGNUM R2 RUF LIGNUM R8 RUF LIGNUM R6 RUF LIGNUM R4 RUF SZ1 + RUF BRIKLET RUF 100 RUF 200 RUF 300 RUF 400 RUF 500 RUF 600 RUF 800 RUF 1100+ RAP for grinding sludge RUF 4 for grinding sludge RUF 7.5-22 for grinding sludge RAP RUF 4-11 RUF 11-22 RUF 18,5-55 RUF 75-90
Material wood wood wood wood wood wood wood organic organic organic organic organic organic organic organic grinding slurry grinding slurry grinding slurry metal metal metal metal metal
Max. productivity (kg/h) 410 500 1050 670 590 30-60 300 120 200 300 360 500 590 670 1020 15-40 20-80 45-400 Aluminum 30-50 Brass, bronze, copper 50–100 Magnesium 20 Steel and casting 30–80 Titanium 20-50 Aluminum 60-300 Brass, bronze, copper 100–220 Magnesium 240-50 Steel and casting 100–200 Titanium 65-130 Aluminum 130-700 Brass, bronze, copper 150-1150 Magnesium 60-155 Steel and casting 200-850 Titanium 140-550 Aluminum 30-1600 Brass, bronze, copper 450-2700 Magnesium 100-550 Steel and casting 350-2800 Titanium 300-1000 Aluminum 900–2400; Brass, bronze, copper 3.000-5.000; Magnesium 730-950; Steel and cast iron 2.300-3.000; Titanium 800–1600
Power (kWt) 30 22 75 37 30 4 15 7,5 11 18,5 22 22 30 37 75 4 4 7,5-22 4 4, 5.5, 11 11, 15, 22 18.5, 30, 55 75, 90
Compression pressure, max. (kg/cm²) 1700 1700 1700 1700 1700 Special Special 1700 1700 1700 1700 1700 1700 1700 1700 3800 2300 2 000–3 000 1600–3800 600-3,700 1700-5000 1700–5000 2,500 - 3,900
Briquette size in section (mm) 150x60 150x60 240x70 150x60 150x60 Ø 70 Ø 30 150x60, 150x70, 150x75 150x60, 150x70, 150x75 150x60, 150x70, 150x75 150x60, 150x70, 150x75 150x60, 150x70, 150x75 150x60, 150x70, 150x75 150x60, 150x70, 150x75 240 x 70, 240 x 80 60 х 40 Ø 60 Ø 80, Ø 100, Ø 120 60x40, 60x60, 80x40 60x40, 60x60, Ø60, Ø80 150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100 150x75, 150x120, Ø80, Ø100, Ø120 Ø120, Ø150
Size (LxWxH) (mm) 2100 x 1900 x 2000 2900 x 2000 x 2100 2700 х 2400 х 2400 2900 х 2100 х 2100 2900 х 2100 х 2100 1300 х 1200 х 1400 3000 х 2300 х 2200 1800 х 1600 х 2000 1800 х 1600 х 2000 1800 х 1900 х 2100 1800 х 1900 х 2100 2000 х 2000 х 2100 2000 х 2000 х 2100 2000 х 2000 х 2100 2700 х 2400 х 2400 1300 х 1000 х 1600 1300 х 1500 х 1900 3000 х 2000 х 2000 1300 x 1000 x 1600 1300 x 1500 x 1900 līdz 1600 х 1600 х 1950 ок. 2700 х 2000 х 2200 ок. 2900 х 2400 х 2200 ок. 3800 х 3800 х 2500
Weight (t) 3,3 3,8 6,5 4,2 4,1 0,8 3,5 3 3,2 3,3 3,6 3,7 4,1 4,2 6,5 1 1.3 3,3 - 3,7 1 1,4 - 1,8 3,3-3,9 4,6 - 6,5 12 т.

Our projects

Starting the chain conveyor

Starting the chain conveyor

From idea to finished product! RMP designs and manufactures non-standard equipment adapted to the needs of the customer.

In July 2022, a chain conveyor was installed for a Latvian company, consisting of two conveyors with separate drives. Drive: electric motor - reducer mounted directly on the conveyor frame. A 90-degree chain conveyor with a straight section (length 9 meters) was attached to an existing production line. Estimated load of the conveyor - up to 1000 kg of simultaneous presence of the product on the line.

RUF Lignum R6 in Latvia

RUF Lignum R6 in Latvia

In February 2022, our specialists successfully launched 2 new RUF Lignum R6 briquetting presses for a Latvian woodworking company in Kuldiga.The latest technology of RUF briquetting presses makes it possible to produce high-quality briquettes of the same size and weight from different raw material fractions.Improvements to the Lignum R6 hydraulic motors have increased equipment efficiency by 25%. This is one of the biggest advantages of the R-series - lower power consumption per unit of power. The raw material is pine shavings.

RUF Lignum R6 and Strojplast packing machine

RUF Lignum R6 and Strojplast packing machine

In December 2021, our specialists successfully installed and launched 2 new RUF Lignum R6 briquetting presses together with an Airless sleeve wrappers packaging machine from Strojplast for a Latvian woodworking company in Jekabpils. The company was already involved in the production of briquettes and decided to replace the previous generation of RUF presses with new ones.

From waste to packaged briquettes

From waste to packaged briquettes

In February 2021, our team developed and installed a full-cycle briquetting line. The company has a lot of sawdust and different wood waste in different fractions. In order to achieve an even mass of timber for briquetting by packing briquettes on pallets, only a vibrating table, vibrating conveyors, chipper, several hoppers, a hammer mill, 2 RUF briquetting presses and a Strojplast packing machine are installed. Briquetting line capacity 1.4t / hour.

RUF press in Belarus

RUF press in Belarus

In August 2019, we installed a new RUF Lignum R6 briquetting press for a Belarusian company already engaged in briquette production. The company replaced the previous-generation RUF press with the new one to increase productivity but reduce electricity costs. The further improvement of the hydraulic system of the Lignum R has led to an efficiency increase of around 25%. This is one of the biggest benefits - less power consumption per capacity.

Solution for a briquette manufacturer in Lithuania

Solution for a briquette manufacturer in Lithuania

This time we visited neighboring Lithuania, where in July 2019 we installed a RUF Lignum R6 briquetting system and an Airless packaging machine from Strojplast. In total, these capacities produce approximately 950-970 kg / h of briquettes, which means one pallet of briquettes per hour and about 23 tons per day.

36 tons of briquettes per day - the power of RUF!

36 tons of briquettes per day - the power of RUF!

In July we installed two RUF Lignum R6 presses with a total capacity of around 1500 kg/h. They can produce about 36 tons of briquettes per day. The entrepreneur admits that this is a great way to solve the problem of leftover furniture production. Most of the briquettes are exported.

Latest generation RUF briquetting system with packaging solution from Strojplast

Latest generation RUF briquetting system with packaging solution from Strojplast

In June 2019, we implemented a great solution for a briquette manufacturer by installing a latest generation RUF Lignum R6 press together with a Stroplast packaging machine. In total, this equipment produces 750 kg briquettes per hour.

RUF hydraulic press in Belarus

RUF hydraulic press in Belarus

In March 2019, Belarus installed the RUF Lignum Classic hydraulic press for the production of wood briquettes from sawdust.

RUF Lignum R6 in Estonia

RUF Lignum R6 in Estonia

One more project in Estonia. In november we start up RUF Lignum R6. The company manufactures summer houses from coniferous wood. The material is mainly shavings from planing.

RUF Lignum R2

RUF Lignum R2

In November, we installed RUF Lignum R2 in Belarus, which automatically adjusts the required briquette size for the client. The press is designed to process wood waste.

One more press in Latvia

One more press in Latvia

Briquettes are highly demanded throughout the world. Existing customers are evolving with demand growth. In October, we installed RUF Lignum R6 in Latvia, which automatically adjusts the required briquettes to the customer.

RUF Lignum R6 for conifer waste recycling

RUF Lignum R6 for conifer waste recycling

In August of this year, we installed a RUF Lignum R6 briquette press in Latvia for processing conifer residues.

RUF Lignum R6 and RUF Lignum R4 in Belarus

RUF Lignum R6 and RUF Lignum R4 in Belarus

In August of this year, we installed two new briquetting presses in Belarus - RUF Lignum R6 and RUF Lignum R4. he further improvement of the hydraulic system of the Lignum R has led to an efficiency increase of around 25%. The company recycles plywood chips by producing briquettes with a total output of over 1200 kg/hour, Lignum R6 - 670 kg/h and Lignum R4 - 575 kg/h.

RUF 500 un Strojplast

RUF 500 un Strojplast

In July 2018, SIA RMP installed a new briquetting press RUF 500 in a Latvian wood processing company with an additional bunker, which split the material between two presses, and a conveyor belt and the Strojplast packing machine. In order to interact with all the equipment, it was necessary to install modern control panels to inform about the operation of each machine and warning about a errors.

RMP automatic packing line

RMP automatic packing line

In April 2018 installed a packaging line for briquettes manufactured in Lithuania with a capacity of 1.8 t/h. The company manufactures briquettes with four briquetting machines with briquettes produced in excess of 1,8 ton per hour. Most packaging machines are expensive and do not meet the needs of woodworking companies, because packaging of briquettes is a very complicated process. Thanks to the SIA RMP team and its long experience in the production and processing of briquettes in general, SIA RMP engineers developed a solution suitable for this particular customer.

RUF Lignum R6 and Strojplast packing machine

RUF Lignum R6 and Strojplast packing machine

In May of this year, we installed a new RUF Lignum R6 briquetting press and an Airless shrink packing machine in Estonia. Recent improvements to the hydraulic drive of the LIGNUM R models have increased their efficiency by 25%. The company recycles thermally modified spruce.

Briquetting systems RUF in Transbaikalia

Briquetting systems RUF in Transbaikalia

In April 2017, a new RUF briquetting system for non-ferrous metals was installed. This technology allows to efficiently process scrap metal into secondary raw materials.

Briquetting system RUF Lignum R4

Briquetting system RUF Lignum R4

We installed a RUF Lignum R4 briquetting system with a bunker and a table for packing briquettes at a woodworking enterprise. The latest improvement in hydraulic drives in the LIGNUM R4 models has increased the efficiency of the press by 25%.

Granulator Rudnick & Enners

Granulator Rudnick & Enners

In Rezekne we installed a pellet grate and a Rudnick & Enners conveyor belt. RMP has installed both machines in an existing pellet plant. The grate reduces the amount of dust by sifting the dust from the pellets, which leads to an increase in the quality of the produced product.

Briquetting system RUF 800

Briquetting system RUF 800

The RUF 800 briquetting press processes 660 kg/h of waste wood chips from a wood processing plant. The company sells the resulting briquettes on the market, thereby the company strives to become as efficient as possible. At present, the company has already installed four RUF briquetting systems.

Chopper ERDWICH

Chopper ERDWICH

In 2016, an ERDWICH M600 / 1-600-7.5 kW shredder was installed at an enterprise in Tatarstan. for crushing steel chips.

Briquetting system RUF 11/3300/50x50

Briquetting system RUF 11/3300/50x50

In 2016 was installed the RUF 11/3300/50x50 briquetting system, which briquettes a mixture of steel and aluminum chips.

RUF 400 press

RUF 400 press

The RUF 400 briquetting press is installed in St. Petersburg in 2014. The processed material: waste from tobacco production.

See all projects

FAQ

1

What are the advantages of sawdust/shavings/dust briquetting?

There are several advantages: reduction in the volume of production waste, savings on waste disposal, savings on fines from environmentalists for the removal of sawdust / wood chips / dust, the ability to sell briquettes to the domestic market / export.

2

What equipment, in addition to the press, should be purchased?

To prepare the briquetting zone, it is necessary to consider how to transport raw materials from the point of waste generation to the briquetting press. To do this, you will need screws, an operational batcher and possibly additional equipment: this is determined after visiting and inspecting the zone.

3

What is the payback period?

Здесь учитываются много факторов: объемы отходов на производстве, его влажности. От этого будет зависеть – нужна ли линия подготовки влажного сырья или нужен участок брикетирования от сухого. Ориентировочные сроки – от 1 года до 7 лет.Many factors are taken into account here: the volume of waste in production, its humidity. It will depend on this whether a line for preparing wet raw materials is needed or whether a briquetting zone is needed from dry. Approximate terms - from 0,5 year to 5 years.

4

How do I find the right briquetting machine?

We have many years of experience in briquetting which means that our experts are well-qualified to provide you with professional advice in choosing the right briquette press. We work with you to identify your individual requirements on the basis of the material in question and the production conditions. This then allows us to offer you custom-made briquetting machines or even complete briquetting solutions.

5

Do we need to crush/shred the chips before briquetting?

In the case of long, woolly chips, it may be necessary to crush the starting material beforehand. In this case, we can offer complete solutions together with the relevant suppliers. With our free pressing test, we can establish whether your starting material can be briquetted or whether it needs to be crushed beforehand.

6

What is the best way to pack briquettes?

Several solutions are suitable for packaging: the standard use of plastic bags with a thermal knife seal. But with this type of packaging, the briquettes crumble during transportation. To reduce flaking, a heat-resistant film is used. In it, the briquette, due to the tight arrangement to each other, does not crumble.We offer solutions from Strojplast.

7

Which is better: briquettes or pellets?

It all depends on where you plan to use biofuels. If for stoves, fireplaces, baths and barbecues - definitely briquettes of the RUF type. If for industrial furnaces, then pellets, but modern technologies also allow the use of briquettes for these purposes, because. they have a lower cost, and accordingly the price.

8

Do you provide service and spare parts sales?

Yes, we have a technical department that provides these services.

Ask a question

Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.

By clicking the "Send" button, I give my consent to the processing of personal data and accept the terms of the privacy policy.

We recommend seeing

BPE SHIMADA

The BPE Shimada Extruder Briquetting Press is sold for medium sized professional users and most types of wood and agricultural based raw materials can be used without adding a binder.

Details

RUF LIGNUM Classic

Die The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry.

Details

RUF 100

Our RUF 100 briquette press is particularly suited to small quantities of chips that are produced as a waste product.

Details

RUF 75-90

The RUF 75-90 series is ideally suited to briquetting large quantities of metal chips (e.g. aluminium, steel, brass, titanium, etc.)

Details
Jersikas street 14,
Riga, Latvia, LV-1003
on working days: 08:00 - 17:00 +(371) 67 286 442
for questions and offersrmp@rmp.lv

Thank you!

Your message has been sent.

Have a question?

We will answer! Order a call from our manager.
We usually call you back within 15 minutes.

By clicking the "Send" button, I give my consent to the processing of personal data and accept the terms of the privacy policy.

Order a leasing calculation

By clicking the "Send" button, I give my consent to the processing of personal data and accept the terms of the privacy policy.

To send a resume

Contact details
vacancy
comments
By clicking the "Send" button, I give my consent to the processing of personal data and accept the terms of the privacy policy.
Didn't find the information you are looking for?

Contact us

Contact details
comments
By clicking the "Send" button, I give my consent to the processing of personal data and accept the terms of the privacy policy.