Hammer mills are machines that are dedicated for secondary processing of wood chips to fraction suitable for pelleting or briquetting.
The machine’s construction is simple and robust. The drum with hammers, which grind the input material, rotates in a steel-sheet case. A high-quality material guarantees a long service life of hammers. The drum is supported on ball bearings and it is driven by an electromotor through a wedge-belt gear. There must be a free space under the machine because the final fraction comes through the screen on the bottom of the mill. The further transport of the final chip is recommended to be by suction system.
The machine can operate without need of operators presence. The machine operates on higher noise level. Dust level depends on the type of the processed material. The hammer mill must be installed at least under the roof in order to be prevented from direct influences of weather.
Suitable input material size is between 20 – 25 mm. The size, type and humidity of the input material influence the total output of the machine. Hammer mill is dedicated for dry chips production ONLY.
Hammer mills can be delivered with the hopper or designed according to needs of connection to previous machinery.
Can I attend a test pressing?
Trial pressing is carried out free of charge and without any obligation on your part in our Technical Center using your own material. If you wish, you can attend the test press.
Do we need to crush/shred the chips before briquetting?
In the case of long, woolly chips, it may be necessary to crush the starting material beforehand. In this case, we can offer complete solutions together with the relevant suppliers. With our free pressing test, we can establish whether your starting material can be briquetted or whether it needs to be crushed beforehand.
Is there a universal shredder for logs, slabs, etc.?
No, there is no universal grinder.
Is pallet shredding possible?
Yes, this technology exists.
Is there a complete grinding solution?
Yes, some of our suppliers offer a complete solution, the cost depends on the technical task or on the required performance
Which chipper model is suitable for my chips?
The model of the grinder is selected depending on the material, volume, mode of operation.
Ask a question
Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.