RUF 1100+
INDIVIDUALLY CUSTOMISED BRIQUETTE PRESS FOR VARIOUS BIOGENIC MATERIALS
Chips and residues that are produced in very large quantities (e.g. wood, agricultural residues, paper, textile dust, etc.) can best be formed into briquettes through the use of the RUF 1100+. To ensure briquettes of a consistently high quality and density, it is important that the water content of the starting material is below 15%. Briquette formats of either 240 x 70mm or 240 x 80mm are possible with this briquette press, again without the addition of any binding agents. A wide variety of options also enable the briquette press to be optimally tailored to customer requirements.
THE ADVANTAGES FOR YOU AT A GLANCE:
- Fully automatic 24h operation possible
- Long service life & low maintenance costs
- Customisable
- Compact construction
- More than 35 years’ experience
Manufacturer
Contact person
| Material | wood |
| Max. productivity (kg/h) | 425 |
| Power (kWt) | 30 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60 |
| Size (LxWxH) (mm) | 2100 x 1900 x 2000 |
| Weight (t) | 3,3 |
| Material | wood |
| Max. productivity (kg/h) | 485 |
| Power (kWt) | 22 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60 |
| Size (LxWxH) (mm) | 2900 x 2000 x 2100 |
| Weight (t) | 3,8 |
| Material | wood |
| Max. productivity (kg/h) | 1050 |
| Power (kWt) | 75 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 240x70 |
| Size (LxWxH) (mm) | 2700 х 2400 х 2400 |
| Weight (t) | 6,5 |
| Material | wood |
| Max. productivity (kg/h) | 720 |
| Power (kWt) | 37 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60 |
| Size (LxWxH) (mm) | 2900 х 2100 х 2100 |
| Weight (t) | 4,2 |
| Material | wood |
| Max. productivity (kg/h) | 590 |
| Power (kWt) | 30 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60 |
| Size (LxWxH) (mm) | 2900 х 2100 х 2100 |
| Weight (t) | 4,1 |
| Material | wood |
| Max. productivity (kg/h) | 30-60 |
| Power (kWt) | 4 |
| Compression pressure, max. (kg/cm²) | Special |
| Briquette size in section (mm) | Ø 70 |
| Size (LxWxH) (mm) | 1300 х 1200 х 1400 |
| Weight (t) | 0,8 |
| Material | wood |
| Max. productivity (kg/h) | 300 |
| Power (kWt) | 15 |
| Compression pressure, max. (kg/cm²) | Special |
| Briquette size in section (mm) | Ø 30 |
| Size (LxWxH) (mm) | 3000 х 2300 х 2200 |
| Weight (t) | 3,5 |
| Material | organic |
| Max. productivity (kg/h) | 120 |
| Power (kWt) | 7,5 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 1800 х 1600 х 2000 |
| Weight (t) | 3 |
| Material | organic |
| Max. productivity (kg/h) | 200 |
| Power (kWt) | 11 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 1800 х 1600 х 2000 |
| Weight (t) | 3,2 |
| Material | organic |
| Max. productivity (kg/h) | 300 |
| Power (kWt) | 18,5 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 1800 х 1900 х 2100 |
| Weight (t) | 3,3 |
| Material | organic |
| Max. productivity (kg/h) | 360 |
| Power (kWt) | 22 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 1800 х 1900 х 2100 |
| Weight (t) | 3,6 |
| Material | organic |
| Max. productivity (kg/h) | 500 |
| Power (kWt) | 22 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 2000 х 2000 х 2100 |
| Weight (t) | 3,7 |
| Material | organic |
| Max. productivity (kg/h) | 590 |
| Power (kWt) | 30 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 2000 х 2000 х 2100 |
| Weight (t) | 4,1 |
| Material | organic |
| Max. productivity (kg/h) | 670 |
| Power (kWt) | 37 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 150x60, 150x70, 150x75 |
| Size (LxWxH) (mm) | 2000 х 2000 х 2100 |
| Weight (t) | 4,2 |
| Material | organic |
| Max. productivity (kg/h) | 1020 |
| Power (kWt) | 75 |
| Compression pressure, max. (kg/cm²) | 1700 |
| Briquette size in section (mm) | 240 x 70, 240 x 80 |
| Size (LxWxH) (mm) | 2700 х 2400 х 2400 |
| Weight (t) | 6,5 |
| Material | grinding slurry |
| Max. productivity (kg/h) | 15-40 |
| Power (kWt) | 4 |
| Compression pressure, max. (kg/cm²) | 3800 |
| Briquette size in section (mm) | 60 х 40 |
| Size (LxWxH) (mm) | 1300 х 1000 х 1600 |
| Weight (t) | 1 |
| Material | grinding slurry |
| Max. productivity (kg/h) | 20-80 |
| Power (kWt) | 4 |
| Compression pressure, max. (kg/cm²) | 2300 |
| Briquette size in section (mm) | Ø 60 |
| Size (LxWxH) (mm) | 1300 х 1500 х 1900 |
| Weight (t) | 1.3 |
| Material | grinding slurry |
| Max. productivity (kg/h) | 45-400 |
| Power (kWt) | 7,5-22 |
| Compression pressure, max. (kg/cm²) | 2 000–3 000 |
| Briquette size in section (mm) | Ø 80, Ø 100, Ø 120 |
| Size (LxWxH) (mm) | 3000 х 2000 х 2000 |
| Weight (t) | 3,3 - 3,7 |
| Material | metal |
| Max. productivity (kg/h) | Aluminum 30-50 Brass, bronze, copper 50–100 Magnesium 20 Steel and casting 30–80 Titanium 20-50 |
| Power (kWt) | 4 |
| Compression pressure, max. (kg/cm²) | 1600–3800 |
| Briquette size in section (mm) | 60x40, 60x60, 80x40 |
| Size (LxWxH) (mm) | 1300 x 1000 x 1600 |
| Weight (t) | 1 |
| Material | metal |
| Max. productivity (kg/h) | Aluminum 60-300 Brass, bronze, copper 100–220 Magnesium 240-50 Steel and casting 100–200 Titanium 65-130 |
| Power (kWt) | 4, 5.5, 11 |
| Compression pressure, max. (kg/cm²) | 600-3,700 |
| Briquette size in section (mm) | 60x40, 60x60, Ø60, Ø80 |
| Size (LxWxH) (mm) | 1300 x 1500 x 1900 līdz 1600 х 1600 х 1950 |
| Weight (t) | 1,4 - 1,8 |
| Material | metal |
| Max. productivity (kg/h) | Aluminum 130-700 Brass, bronze, copper 150-1150 Magnesium 60-155 Steel and casting 200-850 Titanium 140-550 |
| Power (kWt) | 11, 15, 22 |
| Compression pressure, max. (kg/cm²) | 1700-5000 |
| Briquette size in section (mm) | 150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100 |
| Size (LxWxH) (mm) | ок. 2700 х 2000 х 2200 |
| Weight (t) | 3,3-3,9 |
| Material | metal |
| Max. productivity (kg/h) | Aluminum 30-1600 Brass, bronze, copper 450-2700 Magnesium 100-550 Steel and casting 350-2800 Titanium 300-1000 |
| Power (kWt) | 18.5, 30, 55 |
| Compression pressure, max. (kg/cm²) | 1700–5000 |
| Briquette size in section (mm) | 150x75, 150x120, Ø80, Ø100, Ø120 |
| Size (LxWxH) (mm) | ок. 2900 х 2400 х 2200 |
| Weight (t) | 4,6 - 6,5 |
| Material | metal |
| Max. productivity (kg/h) | Aluminum 900–2400; Brass, bronze, copper 3.000-5.000; Magnesium 730-950; Steel and cast iron 2.300-3.000; Titanium 800–1600 |
| Power (kWt) | 75, 90 |
| Compression pressure, max. (kg/cm²) | 2,500 - 3,900 |
| Briquette size in section (mm) | Ø120, Ø150 |
| Size (LxWxH) (mm) | ок. 3800 х 3800 х 2500 |
| Weight (t) | 12 т. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Name | RUF LIGNUM Classic | RUF LIGNUM R2 | RUF LIGNUM R8 | RUF LIGNUM R6 | RUF LIGNUM R4 | RUF SZ1 + | RUF BRIKLET | RUF 100 | RUF 200 | RUF 300 | RUF 400 | RUF 500 | RUF 600 | RUF 800 | RUF 1100+ | RAP for grinding sludge | RUF 4 for grinding sludge | RUF 7.5-22 for grinding sludge | RAP | RUF 4-11 | RUF 11-22 | RUF 18,5-55 | RUF 75-90 |
| Material | wood | wood | wood | wood | wood | wood | wood | organic | organic | organic | organic | organic | organic | organic | organic | grinding slurry | grinding slurry | grinding slurry | metal | metal | metal | metal | metal |
| Max. productivity (kg/h) | 425 | 485 | 1050 | 720 | 590 | 30-60 | 300 | 120 | 200 | 300 | 360 | 500 | 590 | 670 | 1020 | 15-40 | 20-80 | 45-400 | Aluminum 30-50 Brass, bronze, copper 50–100 Magnesium 20 Steel and casting 30–80 Titanium 20-50 | Aluminum 60-300 Brass, bronze, copper 100–220 Magnesium 240-50 Steel and casting 100–200 Titanium 65-130 | Aluminum 130-700 Brass, bronze, copper 150-1150 Magnesium 60-155 Steel and casting 200-850 Titanium 140-550 | Aluminum 30-1600 Brass, bronze, copper 450-2700 Magnesium 100-550 Steel and casting 350-2800 Titanium 300-1000 | Aluminum 900–2400; Brass, bronze, copper 3.000-5.000; Magnesium 730-950; Steel and cast iron 2.300-3.000; Titanium 800–1600 |
| Power (kWt) | 30 | 22 | 75 | 37 | 30 | 4 | 15 | 7,5 | 11 | 18,5 | 22 | 22 | 30 | 37 | 75 | 4 | 4 | 7,5-22 | 4 | 4, 5.5, 11 | 11, 15, 22 | 18.5, 30, 55 | 75, 90 |
| Compression pressure, max. (kg/cm²) | 1700 | 1700 | 1700 | 1700 | 1700 | Special | Special | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 | 1700 | 3800 | 2300 | 2 000–3 000 | 1600–3800 | 600-3,700 | 1700-5000 | 1700–5000 | 2,500 - 3,900 |
| Briquette size in section (mm) | 150x60 | 150x60 | 240x70 | 150x60 | 150x60 | Ø 70 | Ø 30 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 150x60, 150x70, 150x75 | 240 x 70, 240 x 80 | 60 х 40 | Ø 60 | Ø 80, Ø 100, Ø 120 | 60x40, 60x60, 80x40 | 60x40, 60x60, Ø60, Ø80 | 150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100 | 150x75, 150x120, Ø80, Ø100, Ø120 | Ø120, Ø150 |
| Size (LxWxH) (mm) | 2100 x 1900 x 2000 | 2900 x 2000 x 2100 | 2700 х 2400 х 2400 | 2900 х 2100 х 2100 | 2900 х 2100 х 2100 | 1300 х 1200 х 1400 | 3000 х 2300 х 2200 | 1800 х 1600 х 2000 | 1800 х 1600 х 2000 | 1800 х 1900 х 2100 | 1800 х 1900 х 2100 | 2000 х 2000 х 2100 | 2000 х 2000 х 2100 | 2000 х 2000 х 2100 | 2700 х 2400 х 2400 | 1300 х 1000 х 1600 | 1300 х 1500 х 1900 | 3000 х 2000 х 2000 | 1300 x 1000 x 1600 | 1300 x 1500 x 1900 līdz 1600 х 1600 х 1950 | ок. 2700 х 2000 х 2200 | ок. 2900 х 2400 х 2200 | ок. 3800 х 3800 х 2500 |
| Weight (t) | 3,3 | 3,8 | 6,5 | 4,2 | 4,1 | 0,8 | 3,5 | 3 | 3,2 | 3,3 | 3,6 | 3,7 | 4,1 | 4,2 | 6,5 | 1 | 1.3 | 3,3 - 3,7 | 1 | 1,4 - 1,8 | 3,3-3,9 | 4,6 - 6,5 | 12 т. |
Our projects
Briquetting system in Tukums region
Briquetting system in Tukums region
In December 2023, our specialists implemented a project to install a briquetting system at a wood processing plant in the Tukums district.
The system consists of the following parts: briquetting system RUF 200, feeding conveyor with feeding length 4700 mm, hopper 600 x 1000, extended oil cooler, control cabinet with direct starting system for three engines. Features of the facility: the old press was replaced, an additional waste supply was connected through a conveyor, the cooling system of the press was strengthened, and a productivity of up to 240 briquettes per hour was ensured.
Our specialists successfully carried out high-quality installation and commissioning of all the above equipment, as well as personnel training.
Briquetting systems in Radviliški district, Lithuania
Briquetting systems in Radviliški district, Lithuania
At the end of November 2023, our specialists successfully installed 3 new RUF Lignum R6 briquetting systems for a wood processing company in Radviliški district, Lithuania. The system consists of the following parts: 3 briquetting presses RUF Lignum R6, 3 extraction hopper sets, 3 inspection doors inside hopper. Our specialists have successfully carried out the high-quality assembly and commissioning of all the above-mentioned equipment, as well as personnel training.
Briquetting and packaging system in Madona region
Briquetting and packaging system in Madona region
In November 2023, our specialists implemented a project to install a briquetting and packaging system at a woodworking enterprise in the Madonsky district. The system consists of the following parts: RUF Lignum R6 briquetting press and Strojplast Airless Advance shrink packaging machine with finished product conveyor. Our specialists successfully carried out high-quality installation and commissioning of all the above equipment, as well as personnel training.
Briquetting and packing system in Jēkabpils region
Briquetting and packing system in Jēkabpils region
In October 2023, our specialists implemented a project to install a briquetting and packaging system at a woodworking enterprise in the Jekabpils region. The system consists of the following parts: two RUF Lignum R6 briquetting presses with a set of dust extractors, a 2m3 loading hopper with a lid and a level sensor, an Airless Advance thermal packaging tunnel with a finished product conveyor (Strojplast). Our specialists successfully carried out high-quality installation and commissioning of all the above equipment, as well as personnel training.
Briquetting, packaging and palletizing system in Dobele region
Briquetting, packaging and palletizing system in Dobele region
In September 2023, our specialists implemented a project to install a briquetting, packaging and palletizing system at a woodworking enterprise in the Dobele district.
The system consists of the following parts:
Briquetting system RUF Lignum Classic
Airless Shrink Packaging Machine (Strojplast)
Finished product conveyor (Strojplast)
Palletizing equipment: sorting table, floor lift, vacuum lift, semi-automatic pallet packer, grouping table, manipulator (Strojplast)
Pallet packaging equipment (Strojplast)
Our specialists successfully carried out high-quality installation and commissioning of all of the above equipment.
Automatic line of packaging equipment in Tallinn
Automatic line of packaging equipment in Tallinn
In July 2023, our specialists implemented a project to install an automatic packaging line at a woodworking company in Tallinn, Estonia.
The line carries out automatic selection of briquettes from 3 RUF briquetting presses, their transportation to the grouper, formation of a group of 12 rectangular briquettes, wrapping the prepared group in shrink film, passing the package through a thermal tunnel and a cooling station. The line is equipped with emergency exit, leaflet feeder, briquette flow control and safety sensors. As a result, the line capacity has increased to 240 packs per hour.
Our specialists have successfully carried out high-quality installation and commissioning of all the above equipment.
Briquetting line in Ropaži region
Briquetting line in Ropaži region
In December 2022, our specialists successfully installed a briquetting line for a Latvian woodworking company in the Ropaži region. The line consists of RUF briquetting systems, transport and control systems. The project included the following stages of installation work: dismantling of old equipment, installation of a scraper conveyor and feeder screws, setting up 5 presses for new positions, installation of flexible connections between nodes, laying cable routes, power supply, piping of electronics, installation of raw materials removal, installation of chutes and packing table, as well as the installation of the operator's platform.
RUF Lignum R6 in Jelgava region
RUF Lignum R6 in Jelgava region
In September 2022, our specialists successfully installed 2 new RUF Lignum R6 briquetting presses for a Latvian woodworking company in the Jelgava region. The company has already been involved in recycling and briquette production, and now decided to replace the previous generation of RUF presses with new ones in order to increase productivity and reduce energy costs. Improvements to the Lignum R6 hydraulic motors have increased equipment efficiency by 25%.
The total production capacity is about 1500 kg/h. They can produce about 36 tons of briquettes per day. Raw materials - alder and oak shavings.
Starting the chain conveyor
Starting the chain conveyor
From idea to finished product! RMP designs and manufactures non-standard equipment adapted to the needs of the customer.
In July 2022, a chain conveyor was installed for a Latvian company, consisting of two conveyors with separate drives. Drive: electric motor - reducer mounted directly on the conveyor frame. A 90-degree chain conveyor with a straight section (length 9 meters) was attached to an existing production line. Estimated load of the conveyor - up to 1000 kg of simultaneous presence of the product on the line.
RUF Lignum R6 in Latvia
RUF Lignum R6 in Latvia
In February 2022, our specialists successfully launched 2 new RUF Lignum R6 briquetting presses for a Latvian woodworking company in Kuldiga.The latest technology of RUF briquetting presses makes it possible to produce high-quality briquettes of the same size and weight from different raw material fractions.Improvements to the Lignum R6 hydraulic motors have increased equipment efficiency by 25%. This is one of the biggest advantages of the R-series - lower power consumption per unit of power. The raw material is pine shavings.
RUF Lignum R6 and Strojplast packing machine
RUF Lignum R6 and Strojplast packing machine
In December 2021, our specialists successfully installed and launched 2 new RUF Lignum R6 briquetting presses together with an Airless sleeve wrappers packaging machine from Strojplast for a Latvian woodworking company in Jekabpils. The company was already involved in the production of briquettes and decided to replace the previous generation of RUF presses with new ones.
From waste to packaged briquettes
From waste to packaged briquettes
In February 2021, our team developed and installed a full-cycle briquetting line. The company has a lot of sawdust and different wood waste in different fractions. In order to achieve an even mass of timber for briquetting by packing briquettes on pallets, only a vibrating table, vibrating conveyors, chipper, several hoppers, a hammer mill, 2 RUF briquetting presses and a Strojplast packing machine are installed. Briquetting line capacity 1.4t / hour.
RUF press in Belarus
RUF press in Belarus
In August 2019, we installed a new RUF Lignum R6 briquetting press for a Belarusian company already engaged in briquette production. The company replaced the previous-generation RUF press with the new one to increase productivity but reduce electricity costs. The further improvement of the hydraulic system of the Lignum R has led to an efficiency increase of around 25%. This is one of the biggest benefits - less power consumption per capacity.
Solution for a briquette manufacturer in Lithuania
Solution for a briquette manufacturer in Lithuania
This time we visited neighboring Lithuania, where in July 2019 we installed a RUF Lignum R6 briquetting system and an Airless packaging machine from Strojplast. In total, these capacities produce approximately 950-970 kg / h of briquettes, which means one pallet of briquettes per hour and about 23 tons per day.
36 tons of briquettes per day - the power of RUF!
36 tons of briquettes per day - the power of RUF!
In July we installed two RUF Lignum R6 presses with a total capacity of around 1500 kg/h. They can produce about 36 tons of briquettes per day. The entrepreneur admits that this is a great way to solve the problem of leftover furniture production. Most of the briquettes are exported.
Latest generation RUF briquetting system with packaging solution from Strojplast
Latest generation RUF briquetting system with packaging solution from Strojplast
In June 2019, we implemented a great solution for a briquette manufacturer by installing a latest generation RUF Lignum R6 press together with a Stroplast packaging machine. In total, this equipment produces 750 kg briquettes per hour.
RUF hydraulic press in Belarus
RUF hydraulic press in Belarus
In March 2019, Belarus installed the RUF Lignum Classic hydraulic press for the production of wood briquettes from sawdust.
RUF Lignum R6 in Estonia
RUF Lignum R6 in Estonia
One more project in Estonia. In november we start up RUF Lignum R6. The company manufactures summer houses from coniferous wood. The material is mainly shavings from planing.
RUF Lignum R2
RUF Lignum R2
In November, we installed RUF Lignum R2 in Belarus, which automatically adjusts the required briquette size for the client. The press is designed to process wood waste.
One more press in Latvia
One more press in Latvia
Briquettes are highly demanded throughout the world. Existing customers are evolving with demand growth. In October, we installed RUF Lignum R6 in Latvia, which automatically adjusts the required briquettes to the customer.
RUF Lignum R6 for conifer waste recycling
RUF Lignum R6 for conifer waste recycling
In August of this year, we installed a RUF Lignum R6 briquette press in Latvia for processing conifer residues.
RUF Lignum R6 and RUF Lignum R4 in Belarus
RUF Lignum R6 and RUF Lignum R4 in Belarus
In August of this year, we installed two new briquetting presses in Belarus - RUF Lignum R6 and RUF Lignum R4. he further improvement of the hydraulic system of the Lignum R has led to an efficiency increase of around 25%. The company recycles plywood chips by producing briquettes with a total output of over 1200 kg/hour, Lignum R6 - 670 kg/h and Lignum R4 - 575 kg/h.
RUF 500 un Strojplast
RUF 500 un Strojplast
In July 2018, SIA RMP installed a new briquetting press RUF 500 in a Latvian wood processing company with an additional bunker, which split the material between two presses, and a conveyor belt and the Strojplast packing machine. In order to interact with all the equipment, it was necessary to install modern control panels to inform about the operation of each machine and warning about a errors.
RMP automatic packing line
RMP automatic packing line
In April 2018 installed a packaging line for briquettes manufactured in Lithuania with a capacity of 1.8 t/h. The company manufactures briquettes with four briquetting machines with briquettes produced in excess of 1,8 ton per hour. Most packaging machines are expensive and do not meet the needs of woodworking companies, because packaging of briquettes is a very complicated process. Thanks to the SIA RMP team and its long experience in the production and processing of briquettes in general, SIA RMP engineers developed a solution suitable for this particular customer.
RUF Lignum R6 and Strojplast packing machine
RUF Lignum R6 and Strojplast packing machine
In May of this year, we installed a new RUF Lignum R6 briquetting press and an Airless shrink packing machine in Estonia. Recent improvements to the hydraulic drive of the LIGNUM R models have increased their efficiency by 25%. The company recycles thermally modified spruce.
Briquetting systems RUF in Transbaikalia
Briquetting systems RUF in Transbaikalia
In April 2017, a new RUF briquetting system for non-ferrous metals was installed. This technology allows to efficiently process scrap metal into secondary raw materials.
Briquetting system RUF Lignum R4
Briquetting system RUF Lignum R4
We installed a RUF Lignum R4 briquetting system with a bunker and a table for packing briquettes at a woodworking enterprise. The latest improvement in hydraulic drives in the LIGNUM R4 models has increased the efficiency of the press by 25%.
Granulator Rudnick & Enners
Granulator Rudnick & Enners
In Rezekne we installed a pellet grate and a Rudnick & Enners conveyor belt. RMP has installed both machines in an existing pellet plant. The grate reduces the amount of dust by sifting the dust from the pellets, which leads to an increase in the quality of the produced product.
Briquetting system RUF 800
Briquetting system RUF 800
The RUF 800 briquetting press processes 660 kg/h of waste wood chips from a wood processing plant. The company sells the resulting briquettes on the market, thereby the company strives to become as efficient as possible. At present, the company has already installed four RUF briquetting systems.
Chopper ERDWICH
Chopper ERDWICH
In 2016, an ERDWICH M600 / 1-600-7.5 kW shredder was installed at an enterprise in Tatarstan. for crushing steel chips.
Briquetting system RUF 11/3300/50x50
Briquetting system RUF 11/3300/50x50
In 2016 was installed the RUF 11/3300/50x50 briquetting system, which briquettes a mixture of steel and aluminum chips.
RUF 400 press
RUF 400 press
The RUF 400 briquetting press is installed in St. Petersburg in 2014. The processed material: waste from tobacco production.
FAQ
Ask a question
Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.
We recommend seeing
BPE SHIMADA
The BPE Shimada Extruder Briquetting Press is sold for medium sized professional users and most types of wood and agricultural based raw materials can be used without adding a binder.
Details
RUF LIGNUM Classic
Die The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry.
Details
RUF 100
Our RUF 100 briquette press is particularly suited to small quantities of chips that are produced as a waste product.
Details
RUF 75-90
The RUF 75-90 series is ideally suited to briquetting large quantities of metal chips (e.g. aluminium, steel, brass, titanium, etc.)
DetailsRiga, Latvia, LV-1003