RUF 400

Characteristics

Material:

organic

Max. productivity: (kg/h)

360

Power: (kWt)

Compression pressure, max.: (kg/cm²)

1700

Briquette size in section: (mm)

150x60, 150x70, 150x75

Size: (LxWxH) (mm)

1800 х 1900 х 2100

Weight: (t)

3,6

Ask a question

RUF BIOMASS SERIES. Machine Overview

Description

BRIQUETTING BIOMASS & INCREASING REVENUE.
Our RUF 400 briquette press is ideally suited to briquetting medium quantities of chips. All biogenic residues, such as wood, agricultural residues, paper or textile dust, can be pressed into highly compacted briquettes, without the addition of binding agents. It is important that the water content of the material is below 15 %. The systems in our biomass series can be individually tailored to your requirements and directly incorporated into existing production systems. This means you can earn higher revenues and reduce costs for storage, handling and transport.

THE ADVANTAGES FOR YOU AT A GLANCE:

Fully automatic 24h operation possible
Long service life & low maintenance costs
Customisable
Compact construction
No addition of binding agents
More than 35 years’ experience

Manufacturer

Details

Contact person

Konstantin Miroshnik

Sales Manager

+371 29474852 konstantin.miroshnik@rmp.lv

Ask a question

RUF LIGNUM Classic

Material	wood
Max. productivity (kg/h)	425
Power (kWt)	30
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60
Size (LxWxH) (mm)	2100 x 1900 x 2000
Weight (t)	3,3

RUF LIGNUM R2

Material	wood
Max. productivity (kg/h)	485
Power (kWt)	22
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60
Size (LxWxH) (mm)	2900 x 2000 x 2100
Weight (t)	3,8

RUF LIGNUM R8

Material	wood
Max. productivity (kg/h)	1050
Power (kWt)	75
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	240x70
Size (LxWxH) (mm)	2700 х 2400 х 2400
Weight (t)	6,5

RUF LIGNUM R6

Material	wood
Max. productivity (kg/h)	720
Power (kWt)	37
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60
Size (LxWxH) (mm)	2900 х 2100 х 2100
Weight (t)	4,2

RUF LIGNUM R4

Material	wood
Max. productivity (kg/h)	590
Power (kWt)	30
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60
Size (LxWxH) (mm)	2900 х 2100 х 2100
Weight (t)	4,1

RUF SZ1 +

Material	wood
Max. productivity (kg/h)	30-60
Power (kWt)	4
Compression pressure, max. (kg/cm²)	Special
Briquette size in section (mm)	Ø 70
Size (LxWxH) (mm)	1300 х 1200 х 1400
Weight (t)	0,8

RUF BRIKLET

Material	wood
Max. productivity (kg/h)	300
Power (kWt)	15
Compression pressure, max. (kg/cm²)	Special
Briquette size in section (mm)	Ø 30
Size (LxWxH) (mm)	3000 х 2300 х 2200
Weight (t)	3,5

RUF 100

Material	organic
Max. productivity (kg/h)	120
Power (kWt)	7,5
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	1800 х 1600 х 2000
Weight (t)	3

RUF 200

Material	organic
Max. productivity (kg/h)	200
Power (kWt)	11
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	1800 х 1600 х 2000
Weight (t)	3,2

RUF 300

Material	organic
Max. productivity (kg/h)	300
Power (kWt)	18,5
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	1800 х 1900 х 2100
Weight (t)	3,3

RUF 400

Material	organic
Max. productivity (kg/h)	360
Power (kWt)	22
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	1800 х 1900 х 2100
Weight (t)	3,6

RUF 500

Material	organic
Max. productivity (kg/h)	500
Power (kWt)	22
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	2000 х 2000 х 2100
Weight (t)	3,7

RUF 600

Material	organic
Max. productivity (kg/h)	590
Power (kWt)	30
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	2000 х 2000 х 2100
Weight (t)	4,1

RUF 800

Material	organic
Max. productivity (kg/h)	670
Power (kWt)	37
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	150x60, 150x70, 150x75
Size (LxWxH) (mm)	2000 х 2000 х 2100
Weight (t)	4,2

RUF 1100+

Material	organic
Max. productivity (kg/h)	1020
Power (kWt)	75
Compression pressure, max. (kg/cm²)	1700
Briquette size in section (mm)	240 x 70, 240 x 80
Size (LxWxH) (mm)	2700 х 2400 х 2400
Weight (t)	6,5

RAP for grinding sludge

Material	grinding slurry
Max. productivity (kg/h)	15-40
Power (kWt)	4
Compression pressure, max. (kg/cm²)	3800
Briquette size in section (mm)	60 х 40
Size (LxWxH) (mm)	1300 х 1000 х 1600
Weight (t)	1

RUF 4 for grinding sludge

Material	grinding slurry
Max. productivity (kg/h)	20-80
Power (kWt)	4
Compression pressure, max. (kg/cm²)	2300
Briquette size in section (mm)	Ø 60
Size (LxWxH) (mm)	1300 х 1500 х 1900
Weight (t)	1.3

RUF 7.5-22 for grinding sludge

Material	grinding slurry
Max. productivity (kg/h)	45-400
Power (kWt)	7,5-22
Compression pressure, max. (kg/cm²)	2 000–3 000
Briquette size in section (mm)	Ø 80, Ø 100, Ø 120
Size (LxWxH) (mm)	3000 х 2000 х 2000
Weight (t)	3,3 - 3,7

RAP

Material	metal
Max. productivity (kg/h)	Aluminum 30-50 Brass, bronze, copper 50–100 Magnesium 20 Steel and casting 30–80 Titanium 20-50
Power (kWt)	4
Compression pressure, max. (kg/cm²)	1600–3800
Briquette size in section (mm)	60x40, 60x60, 80x40
Size (LxWxH) (mm)	1300 x 1000 x 1600
Weight (t)	1

RUF 4-11

Material	metal
Max. productivity (kg/h)	Aluminum 60-300 Brass, bronze, copper 100–220 Magnesium 240-50 Steel and casting 100–200 Titanium 65-130
Power (kWt)	4, 5.5, 11
Compression pressure, max. (kg/cm²)	600-3,700
Briquette size in section (mm)	60x40, 60x60, Ø60, Ø80
Size (LxWxH) (mm)	1300 x 1500 x 1900 līdz 1600 х 1600 х 1950
Weight (t)	1,4 - 1,8

RUF 11-22

Material	metal
Max. productivity (kg/h)	Aluminum 130-700 Brass, bronze, copper 150-1150 Magnesium 60-155 Steel and casting 200-850 Titanium 140-550
Power (kWt)	11, 15, 22
Compression pressure, max. (kg/cm²)	1700-5000
Briquette size in section (mm)	150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100
Size (LxWxH) (mm)	ок. 2700 х 2000 х 2200
Weight (t)	3,3-3,9

RUF 18,5-55

Material	metal
Max. productivity (kg/h)	Aluminum 30-1600 Brass, bronze, copper 450-2700 Magnesium 100-550 Steel and casting 350-2800 Titanium 300-1000
Power (kWt)	18.5, 30, 55
Compression pressure, max. (kg/cm²)	1700–5000
Briquette size in section (mm)	150x75, 150x120, Ø80, Ø100, Ø120
Size (LxWxH) (mm)	ок. 2900 х 2400 х 2200
Weight (t)	4,6 - 6,5

RUF 75-90

Material	metal
Max. productivity (kg/h)	Aluminum 900–2400; Brass, bronze, copper 3.000-5.000; Magnesium 730-950; Steel and cast iron 2.300-3.000; Titanium 800–1600
Power (kWt)	75, 90
Compression pressure, max. (kg/cm²)	2,500 - 3,900
Briquette size in section (mm)	Ø120, Ø150
Size (LxWxH) (mm)	ок. 3800 х 3800 х 2500
Weight (t)	12 т.


Name	RUF LIGNUM Classic	RUF LIGNUM R2	RUF LIGNUM R8	RUF LIGNUM R6	RUF LIGNUM R4	RUF SZ1 +	RUF BRIKLET	RUF 100	RUF 200	RUF 300	RUF 400	RUF 500	RUF 600	RUF 800	RUF 1100+	RAP for grinding sludge	RUF 4 for grinding sludge	RUF 7.5-22 for grinding sludge	RAP	RUF 4-11	RUF 11-22	RUF 18,5-55	RUF 75-90
Material	wood	wood	wood	wood	wood	wood	wood	organic	organic	organic	organic	organic	organic	organic	organic	grinding slurry	grinding slurry	grinding slurry	metal	metal	metal	metal	metal
Max. productivity (kg/h)	425	485	1050	720	590	30-60	300	120	200	300	360	500	590	670	1020	15-40	20-80	45-400	Aluminum 30-50 Brass, bronze, copper 50–100 Magnesium 20 Steel and casting 30–80 Titanium 20-50	Aluminum 60-300 Brass, bronze, copper 100–220 Magnesium 240-50 Steel and casting 100–200 Titanium 65-130	Aluminum 130-700 Brass, bronze, copper 150-1150 Magnesium 60-155 Steel and casting 200-850 Titanium 140-550	Aluminum 30-1600 Brass, bronze, copper 450-2700 Magnesium 100-550 Steel and casting 350-2800 Titanium 300-1000	Aluminum 900–2400; Brass, bronze, copper 3.000-5.000; Magnesium 730-950; Steel and cast iron 2.300-3.000; Titanium 800–1600
Power (kWt)	30	22	75	37	30	4	15	7,5	11	18,5	22	22	30	37	75	4	4	7,5-22	4	4, 5.5, 11	11, 15, 22	18.5, 30, 55	75, 90
Compression pressure, max. (kg/cm²)	1700	1700	1700	1700	1700	Special	Special	1700	1700	1700	1700	1700	1700	1700	1700	3800	2300	2 000–3 000	1600–3800	600-3,700	1700-5000	1700–5000	2,500 - 3,900
Briquette size in section (mm)	150x60	150x60	240x70	150x60	150x60	Ø 70	Ø 30	150x60, 150x70, 150x75	150x60, 150x70, 150x75	150x60, 150x70, 150x75	150x60, 150x70, 150x75	150x60, 150x70, 150x75	150x60, 150x70, 150x75	150x60, 150x70, 150x75	240 x 70, 240 x 80	60 х 40	Ø 60	Ø 80, Ø 100, Ø 120	60x40, 60x60, 80x40	60x40, 60x60, Ø60, Ø80	150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100	150x75, 150x120, Ø80, Ø100, Ø120	Ø120, Ø150
Size (LxWxH) (mm)	2100 x 1900 x 2000	2900 x 2000 x 2100	2700 х 2400 х 2400	2900 х 2100 х 2100	2900 х 2100 х 2100	1300 х 1200 х 1400	3000 х 2300 х 2200	1800 х 1600 х 2000	1800 х 1600 х 2000	1800 х 1900 х 2100	1800 х 1900 х 2100	2000 х 2000 х 2100	2000 х 2000 х 2100	2000 х 2000 х 2100	2700 х 2400 х 2400	1300 х 1000 х 1600	1300 х 1500 х 1900	3000 х 2000 х 2000	1300 x 1000 x 1600	1300 x 1500 x 1900 līdz 1600 х 1600 х 1950	ок. 2700 х 2000 х 2200	ок. 2900 х 2400 х 2200	ок. 3800 х 3800 х 2500
Weight (t)	3,3	3,8	6,5	4,2	4,1	0,8	3,5	3	3,2	3,3	3,6	3,7	4,1	4,2	6,5	1	1.3	3,3 - 3,7	1	1,4 - 1,8	3,3-3,9	4,6 - 6,5	12 т.

FAQ

What kind of work do you do?

RMP provides the project design works conducting, equipment supply its assembly and adjustment, personnel training, warranty and post-warranty equipment servicing.

Do you provide service and spare parts sales?

We provide our customers with the provision of services and the sale of spare parts. Prompt delivery of spare and wear parts is usually carried out to the customer's door from a warehouse in Riga or, if necessary, from the manufacturer's warehouse.

How long does it take for the purchase of a briquetting press to pay for itself?

Amortisation periods can be less than three years, in certain cases even less than 1 year. However, the amortisation period depends on the material to be made into briquettes and the quantity. Thanks to the reduction in volume, costs for transport, storage and handling are cut. The amortisation period can be further reduced through the sale of the briquettes and the recovery of coolants.

Can we be present at the pressing test?

At your request, you can be present at the test pressing in Technical Centre and you can get advice from our experts. Furthermore, you will receive a detailed pressing report and will be given the briquettes made during the test pressing.

Can I attend a test pressing?

Trial pressing is carried out free of charge and without any obligation on your part in our Technical Center using your own material. If you wish, you can attend the test press.

What are the advantages of sawdust/shavings/dust briquetting?

There are several advantages: reduction in the volume of production waste, savings on waste disposal, savings on fines from environmentalists for the removal of sawdust / wood chips / dust, the ability to sell briquettes to the domestic market / export.

What equipment, in addition to the press, should be purchased?

To prepare the briquetting zone, it is necessary to consider how to transport raw materials from the point of waste generation to the briquetting press. To do this, you will need screws, an operational batcher and possibly additional equipment: this is determined after visiting and inspecting the zone.

What is the payback period?

Many factors are taken into account here: the volume of waste in production, its humidity. It will depend on this whether a line for preparing wet raw materials is needed or whether a briquetting zone is needed from dry. Approximate terms - from 0,5 year to 5 years.

How do I find the right briquetting machine?

We have many years of experience in briquetting which means that our experts are well-qualified to provide you with professional advice in choosing the right briquette press. We work with you to identify your individual requirements on the basis of the material in question and the production conditions. This then allows us to offer you custom-made briquetting machines or even complete briquetting solutions.

Do we need to crush/shred the chips before briquetting?

In the case of long, woolly chips, it may be necessary to crush the starting material beforehand. In this case, we can offer complete solutions together with the relevant suppliers. With our free pressing test, we can establish whether your starting material can be briquetted or whether it needs to be crushed beforehand.

What is the best way to pack briquettes?

Several solutions are suitable for packaging: the standard use of plastic bags with a thermal knife seal. But with this type of packaging, the briquettes crumble during transportation. To reduce flaking, a heat-resistant film is used. In it, the briquette, due to the tight arrangement to each other, does not crumble.We offer solutions from Strojplast.

Which is better: briquettes or pellets?

It all depends on where you plan to use biofuels. If for stoves, fireplaces, baths and barbecues - definitely briquettes of the RUF type. If for industrial furnaces, then pellets, but modern technologies also allow the use of briquettes for these purposes, because. they have a lower cost, and accordingly the price.

Do you provide service and spare parts sales?

Yes, we have a technical department that provides these services.

What type of chipping is preferred?

It all depends on the material at the input and on the requirements of the fraction at the output. There are drum grinders, hammer crushers, chippers, shredders, etc.

Can it be installed outdoors? Yes, some equipment can be installed outdoors, but it is better to provide a canopy from direct precipitation

Yes, some equipment can be installed outdoors, but it is better to provide a canopy from direct precipitation

What is the maximum diameter of the barrel chopping?

About 500mm

Is there a universal shredder for logs, slabs, etc.?

No, there is no universal grinder.

Is pallet shredding possible?

Yes, this technology exists.

Is there a complete grinding solution?

Yes, some of our suppliers offer a complete solution, the cost depends on the technical task or on the required performance

Can you supply a turnkey plant?

Yes, we can design and deliver a turnkey plant, from any fraction and moisture content of raw materials.

How long is the service life of a machine?

RUF briquette presses are very robust and are known for having a low level of wear and tear. Some of our systems have been in use for more than 25 years.

What other metal waste, besides metal shavings and grinding sludge, can the RUF press briquet?

For example, aluminum foil, aluminum cans, aluminum caps from medicine containers, spent cartridges, titanium sponge, shredded copper wire. Send us information about your waste and we will definitely answer you on the possibility of briquetting, in case of doubt, we will offer to conduct a test briquetting.

Is there an “all-rounder” press for all possible materials?

We always try to find the best possible briquetting solution. Our range has therefore been specifically developed for certain materials, production conditions or marketing purposes of the briquettes. Our experts will be happy to advise you with respect to processing several different materials with one briquetting machine.

Do we need to crush/shred the chips before briquetting?

Why carry out test briquetting?

By testing, our specialists determine the ability of chips to briquetting, which press model is best suited for a particular material, whether there is a need for options. In the process of testing, parameters such as the density of the briquette, the strength of the briquette (friability test), the amount of coolant squeezed out are determined.

How is a test pressing done? Is it done free of charge?

Test pressing is done free of charge and without any obligation on your part, and is carried out in Technical Centre using your own material. At your request, you can be present at the test pressing. The results are important for the choice of the briquetting machine – for example, briquette thickness, residual moisture, durability to withstand handling, the amount of cooling lubricants recovered, etc.

Where to buy spare parts and consumables for the RUF press?

Our warehouse in Riga always has the main spare parts for RUF presses. Some positions, according to your application, we order the manufacturer and arrange delivery to our warehouse. The manufacturer maintains an extensive stock of spare parts for almost all RUF presses produced to date.

Why grind metal chips?

In the process of grinding, the volume of chips is reduced several times, which reduces the cost of production facilities, storage, and transportation. The grinding procedure will prepare the long, loach-like chips for briquetting.

Which chipper model is suitable for my chips?

The model of the grinder is selected depending on the material, volume, mode of operation.

How to load shavings into the shredder hopper?

Grab, loader, special hoist for chip carts.

How is the crushed material unloaded from the grinder?

As a rule, the chipper is mounted on a base frame, under which a chip cart or conveyor can be placed.

Is it possible to grind chips containing large foreign inclusions?

Yes, you can. There are different systems of shredders - with an ejection system and without an ejection system for foreign matter. Our experts will help you choose the type and model of grinder that matches your raw material.

The press is broken, what should I do?

Be patient and call +(371) 29 297 558

The equipment does not start, what should I do?

Call +(371) 29 297 558. Our specialists are always in touch.

Is it possible to use non-original spare parts?

No, because it leads to more press failure and costly repairs.

What additional information needs to be provided so that the application can be processed more quickly?

Provide the press number, a description of the damage and the number of hours worked.

The operator of the work press has changed, what needs to be done?

How often should maintenance be performed?

The maintenance schedule is specified in the press operating instructions.

Ask a question

Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.

We recommend seeing

BPE SHIMADA

The BPE Shimada Extruder Briquetting Press is sold for medium sized professional users and most types of wood and agricultural based raw materials can be used without adding a binder.

Details

RUF LIGNUM Classic

Die The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry.

Details

RUF 100

Our RUF 100 briquette press is particularly suited to small quantities of chips that are produced as a waste product.

Details

RUF 1100+

Chips and residues that are produced in very large quantities (e.g. wood, agricultural residues, paper, textile dust, etc.).

Details

RUF 75-90

The RUF 75-90 series is ideally suited to briquetting large quantities of metal chips (e.g. aluminium, steel, brass, titanium, etc.)

Details

Jersikas street 14,
Riga, Latvia, LV-1003

Working hours: 08:00 - 17:00 +(371) 67 286 442

for questions and offersrmp@rmp.lv