Roller debarking machines
In the woodworking industry the bark is often seen as a hindrance by production. During the material preparation for pelletizing in the pulp and paper industry as well as by preventive treatment against pests and fungus are used different methods of machine debarking.
The roller debarking machine produced by Rudnick & Enners Company effectively removes the bark from roundwood and trunks of various diameters obtained by forest thinning. The bark is removed at low speeds by logs friction on the rotor rolls and on each other.
Debarking capability and quality are regulated by the duration of the cycle. Even trees rhizomes can be processed. The removed bark passes through the holes between the rolls and falls down. The capability of the roll debarking machine can attained up to 1.600 cm3 per shift.
Investments in the debarking machine produced by Rudnick & Enners Company are justified thanks to its robust design and low wear level.
Roll debarking machine from the single producer
In most cases the greatest economic efficiency can be attained by fully debarking machine integration into the line.
Rudnick & Enners Company supplies innovative production technologies from the single producer.
BENEFITS
- economical
- flexible in length and logs diameter
- effective
- suitable for different geometries logs
- suitable for different wood types
- adjustable barking quality
For the bark grinding we recommend bark grinding using.
Manufacturer
Contact person
Our projects
From waste to packaged briquettes
From waste to packaged briquettes
In February 2021, our team developed and installed a full-cycle briquetting line. The company has a lot of sawdust and different wood waste in different fractions. In order to achieve an even mass of timber for briquetting by packing briquettes on pallets, only a vibrating table, vibrating conveyors, chipper, several hoppers, a hammer mill, 2 RUF briquetting presses and a Strojplast packing machine are installed. Briquetting line capacity 1.4t / hour.
RUF press in Belarus
RUF press in Belarus
In August 2019, we installed a new RUF Lignum R6 briquetting press for a Belarusian company already engaged in briquette production. The company replaced the previous-generation RUF press with the new one to increase productivity but reduce electricity costs. The further improvement of the hydraulic system of the Lignum R has led to an efficiency increase of around 25%. This is one of the biggest benefits - less power consumption per capacity.
Solution for a briquette manufacturer in Lithuania
Solution for a briquette manufacturer in Lithuania
This time we visited neighboring Lithuania, where in July 2019 we installed a RUF Lignum R6 briquetting system and an Airless packaging machine from Strojplast. In total, these capacities produce approximately 950-970 kg / h of briquettes, which means one pallet of briquettes per hour and about 23 tons per day.
FAQ
Ask a question
Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.
We recommend seeing
Riga, Latvia, LV-1003