Single-Shaft Shredders Series P are low-speed shredders used for shredding of a diverse small wood residue. The processed material dimension is limited by the thrust’s width and height in order to prevent jamming of material in the hopper. The material is pressed towards the rotor by the hydraulic thrust. The blades separate the material against a counter-blade; the material is being pulled down under the rotor, passing through a separating screen that is mounted in the machine column under the rotor. Finished chips are discharged into the area below the separating screen. The further chip transport takes place according to the specific conditions and requirements of the customer.
The machine can operate without need of operators presence. The machine operates on lower noise level and can be installed inside the plants. Dustiness depends on the type and humidity of the processed material. The shredder must be installed at least under the roof in order to be prevented from direct influences of weather.
1 STERE = 0,50 – 0,75 CUBIC METR (m3)
for the following type of mateials such as slabs, cut-offs, etc.
Didn't find the information you are looking for? Ask your question and we will answer it as soon as possible.
Your message has been sent.
We will answer! Order a call from our manager.
We usually call you back within 15 minutes.
